4: Connecting The Ac Power Cord - Sony STR-DE197 Marketing Operating Instructions Manual

4: Connecting the AC
power cord
Connecting the AC power
cord
Connect the AC power cord to a wall outlet.
*
AC OUTLET
AC power cord
AC OUTLET
* The configuration, shape, and number of AC outlets
vary according to the model and the area code.
Notes
• Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver's AC OUTLET
does not exceed the wattage stated on the rear panel.
Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this
outlet. This may cause a malfunction.
To a wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
"INITIAL" appears in the display.
The following are reset to their factory
settings.
• All preset stations.
• All index names for inputs and preset
stations.
• All settings for the speaker system and
sound adjustments.
• MASTER VOLUME –/+ is set to "VOL
MIN".
GB
9