Using The Radio Data System (Rds); Models Of Area Code Cel, Cek - Sony STR-DE197 Marketing Operating Instructions Manual

Using the Radio Data
System (RDS)
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio
Data System), which enables radio stations to
send additional information along with the
regular program signal. You can also display
RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS services in your area, check
with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM band
using automatic tuning (page 10), direct
tuning (page 11), or preset tuning
(page 12).
When you tune in a station that provides RDS
services, the program service name appears in
the display.
Note
RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak.
Displaying RDS information
While receiving an RDS station, press
DISPLAY repeatedly.
Each time you press the button, RDS
information on the display changes cyclically as
follows:
Program Service name t Frequency t
Program Type indication
b)
t Current Time indication (in 24-
indication
hour system)
a)
Type of program being broadcast (see page 14).
b)
Text messages sent by the RDS station.
Notes
• If there is an emergency announcement by
government authorities, "ALARM" flashes in the
display.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS service,
"NO XXXX" (such as "NO TEXT") appears in the
display.
a)
t Radio Text
continued
13
GB