Sony STR-DA5300ES Operating Instructions Manual page 11

Remote commander
You can use the supplied remote RM-AAL009
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate (page 119).
RM-AAL009
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby)
video components that the
remote is assigned to operate
(page 119).
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1 (on/
Press to turn the receiver on or
standby) off.
If ZONE 2 or ZONE 3 is
selected, only the main receiver
is turned on or off with this
button. To turn off all
components including an
amplifier in zone 2 or zone 3,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Saving the power in
standby mode.
When "HDMI Control"
(page 60) and "RS-232C
Control" (page 61) are set to
"OFF."
C Input
Press one of the buttons to
buttons
select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
(wj). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components (page 53). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 119).
D ZONE 2
Press to enable the zone 2 or
ZONE 3 zone 3 operation (page 101).
E AMP
Press to enable the receiver
operation (page 41).
F MUSIC
Press to select sound field
(page 67).
continued
11 GB