Sony STR-DA5300ES Operating Instructions Manual page 104

Setting audio/video output
signals to the zone 2/zone 3
1
Press AMP.
If "GUI MODE" is not displayed in the
display window of the receiver, follow the
steps given in "7: Operating the receiver
using the GUI (Graphical User
Interface)" (page 41).
2
Press MENU repeatedly to
display the GUI menu on the TV
screen.
3
Press V/v repeatedly to select
"Settings," then press
4
Press V/v repeatedly to select
"Multi Zone," then press
5
Press V/v to select the zone to
which you want to output
104
GB
audio/video signals, then press
"Main" (this receiver) is always selected.
If you do not change the setting, proceed
to step 7.
1
6
Press V/v to select, "ON" or
"OFF," then press
3-7
2
7
Press V/v/B/b repeatedly to
select item and parameter, then
press
Multi Zone menu parameters
x Power
Lets you turn zone operation on.
• ON
• OFF
or b.
x Input
Lets you select the source that is output to the
zone. Audio and video signals are output to
.
zone 2, only audio signals are output to zone 3.
x Volume
Lets you adjust the volume in the zone.
.
.
.