Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Operating Instructions Manual page 43

x LIP SYNC (Time alignment)
(STR-DA5000ES only)
Initial setting: 0 ms
Lets you delay the output of audio to adjust the gap
between video and audio. You can adjust from 0 ms to
200 ms in 10 ms steps.
x DC P.LINEARIZER (Phase Linearlizing)
Lets you change the phase polarity of low frequency
signals and enhance the bass.
• OFF
The bass is not enhanced.
• STD
• MID
• HI
The bandwidth range of the phase correction
increases in the order of "STD", "MID", "HI".
x S.FIELD LINK (Sound field link)
• ON
Lets you apply the last selected sound field to an
input whenever it is selected. For example, if you
select STADIUM for the CD/SACD input, then
change to a different input and return to CD/SACD,
STADIUM will automatically be applied again.
• OFF
Sound field link is not activated.
x DEC. PRIORITY
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is "AUTO" for VIDEO 1, VIDEO 2,
VIDEO 3 and TV/SAT, and "PCM" for DVD, TAPE,
MD/DAT, CD/SACD, TUNER and PHONO. You can
use DECODE PRIORITY on the front panel.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. When set to
"AUTO" and the sound from the digital audio jacks
(for CD, etc.) is interrupted when playback starts, set
to "PCM".
x 2 WAY REMOTE
(2 way remote control system)
• ON
Lets you turn on the 2 way remote control system.
Normally, select "ON".
• OFF
Lets you turn off the 2 way remote control system.
When you use another receiver, etc. that is also
compatible with the 2 way remote control system,
together with this receiver, select the component for
which you use the 2 way remote control system.
Then set the 2 way remote control system for the
component to "ON". For other components, set the 2
way remote control system to "OFF".
x COLOR SYSTEM
(OSD color system)
(Models of area code CEL only)
Lets you select the color system.
• NTSC
• PAL
x OSD H.POSITION
(OSD horizontal position)
Initial setting: 4
Lets you adjust the position of the on-screen display
horizontally. You can adjust from 0 to 64.
x OSD V.POSITION
(OSD vertical position)
Initial setting: 4
Lets you adjust the position of the on-screen display
vertically. You can adjust from 0 to 32.
x DIMMER (Brightness of the display)
Lets you adjust the brightness of the display in 3 steps.
For STR-DA3000ES, DIMMER indicator lights up.
When you set to turn off the display completely, the
MULTI CHANNEL DECODING indicator is also
turned off.
x UP YUV HUE (Video hue level)
Initial setting: 4
Lets you adjust the hue of the images when you
upconvert the video or S-video signals to component
video signals. You can adjust from 1 to 7.
x UP YUV SHARPNESS (Video sharpness level)
Initial setting: 4
Lets you adjust the sharpness of the images when you
upconvert the video or S-video signals to component
video signals. You can adjust from 1 to 7.
x UP YUV COLOR (Video chroma level)
Initial setting: 4
Lets you adjust the chroma of the images when you
upconvert the video or S-video signals to component
video signals. You can adjust from 1 to 7.
x DIGITAL ASSIGN ?
(Digital audio input assignment)
Lets you assign the digital audio input to other input.
For details, see "Assigning the audio input" on
page 38.
x USER PRESET MEM.?
(User preset memory)
Lets you store the adjusted sound field settings, etc. For
details, see "Storing the adjusted settings" on page 48.
continued
GB
43