Sony STR-DA3000ES Operating Instructions (STRDA3000ES) Operating Instructions Manual page 32

Fm stereo fm/am receiver
Hide thumbs Also See for STR-DA3000ES Operating Instructions (STRDA3000ES):
Table of Contents

Advertisement

O Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 25–29 for tuner operations.
P 96/24: Lights up when the receiver is
decoding DTS 96 kHz/24 bit signals.
Q MATRIX: Lights up when DTS-ES Matrix
decoding is activated.
R DISCRETE: Lights up when DTS-ES
Discrete decoding is activated.
S CINEMA: Lights up when DTS Neo:6
Cinema decoding is activated.
T NEO:6: Lights up when DTS Neo:6 Cinema/
Music decoding is activated.
U MUSIC: Lights up when Pro Logic II Music
or DTS Neo:6 Music decoding is activated.
V MOVIE: Lights up when Pro Logic II Movie
decoding is activated.
W ; PRO LOGIC (II): Lights up when the
receiver applies Pro Logic processing to 2
channel signals in order to output the center
and surround channel signals. This indicator
also lights when the Pro Logic II Movie/Music
decoder is activated. However, this indicator
does not light if both the center and surround
speakers are set to "NO".
X L.F.E.: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel. When the sound of the LFE
channel signal is actually being reproduced,
the bars underneath the letters lights up to
indicate the level. Since the LFE signal is not
recorded in all parts of the input signal the bar
indication will fluctuate (and may turn off)
during playback.
GB
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-da5000es

Table of Contents