Sony R-DG1200 Operating Instructions Manual page 98

Name Function
G DTS/
"DTS" lights up when the
DTS-ES/ receiver is decoding DTS
DTS 96/24 signals.
"DTS-ES" lights up when
the receiver is decoding
DTS-ES signals.
"DTS 96/24" lights up
when the receiver is
decoding DTS 96 kHz/24
bit signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 93).
H D.RANGE
Lights up when dynamic
range compression is
activated.
I CAT
Lights up when category
mode is selected during
satellite radio operation.
J SP A/SP B/
Lights up according to the
SP A+B speaker system used
(page 40). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
K SLEEP
Lights up when the sleep
timer is activated.
L A.DIRECT
Lights up when the receiver
is processing Analog Direct
signals.
M Tuner
Lights up when using the
indicators receiver to tune in radio
stations, etc.
N SIRIUS
Lights up when
SiriusConnect Home tuner
is connected and "SIRIUS"
is selected.
O MEM
Lights up when a memory
function, such as Name
Input etc., is activated.
US
98
Name Function
P XM
Lights up when XM Mini-
Tuner and Home Dock are
connected and "XM
RADIO" is selected.
Q ; PL/
"; PL" lights up when the
; PL II/ receiver applies Dolby Pro
; PL IIx
Logic processing to 2
channel signals in order to
output the center and
surround channel signals.
"; PL II" lights up when
the Dolby Pro Logic II
decoder is activated.
"; PL IIx" lights up when
the Dolby Pro Logic IIx
decoder is activated.
However, these indicators
do not light up if there are
no center and surround
speakers and you select a
sound field using the A.F.D.
button.
R BI-AMP
Lights up when "Sur Back
Assign" is set to "BI-
AMP".
S EQ
Lights up when the
equalizer is activated.
T NEO:6
Lights up when DTS Neo:6
Cinema/Music decoding is
activated.
U DTS-HD
"DTS-HD MSTR" lights up
MSTR/ when the receiver is
DTS-HD HI decoding DTS-HD Master
RES/ Audio signals.
"DTS-HD HI RES" lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
V LPCM
Lights up when Linear
PCM signals are detected.