Sony R-DG1200 Operating Instructions Manual page 97

About the indicators on the display window
COAX OPT
LFE
SW
MULTI IN
HDMI
L C R
SL S SR
SB L SB SB R
Name Function
A SW
Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the LFE signal in the disc
being played back or the
low frequency components
of the front channels.
B LFE
Lights up when the disc
being played back contains
an LFE (Low Frequency
Effects) channel and the
LFE channel signal is
actually being reproduced.
C COAX
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the COAXIAL
jack.
D OPT
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the OPTICAL jack.
D + EX TrueHD Neural THX DTS
DTS - HD MSTR HI RES
DMPORT ANALOG LPCM
- - /
ES 96 24 D.RANGE CAT
NEO:6 PL ll MEM MONO
X
EQ - Bl AMP XM SIRIUS
Name Function
E ; D/
"; D" lights up when the
; D EX/ receiver is decoding Dolby
; D+/ Digital signals.
; TrueHD "; D EX" lights up when
the receiver is decoding
Dolby Digital Surround EX
signals.
"; D+" lights up when the
receiver is decoding Dolby
Digital Plus signals.
"; TrueHD" lights up
when the receiver is
decoding Dolby TrueHD
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to "AUTO" (page 93).
F Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
SP A B SLEEP
+
ST
A.DIRECT
continued
US
97