Sony 3-289-204-12(1) Operating Instructions Manual page 32

Function for conversion of video
signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT or HDMI OUT jack as
shown in the illustration.
• Video signals can be output as HDMI video
and component video signals.
• Component video signals can be output as
HDMI video and video signals.
In the video input/output conversion table of the receiver
Refer to "In the video input/output conversion table classified by the menu settings" (page 34) on
the conversion function of images.
Output Signals
OUTPUT jack
INPUT jack
HDMI IN A
COMPONENT
VIDEO IN B
VIDEO IN C
a : Video signals are up-converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
32 US
COMPONENT VIDEO
HDMI OUT
MONITOR OUT
f
a
a
For details on the video converting function,
see "In the video input/output conversion table
classified by the menu settings" (page 34).
MONITOR VIDEO
X
a/f
a
Input Signals
OUT
X
X
f