Exit - Sony TA-VE800G Operating Instructions Manual

Using Surround Sound
5
Click BASS + or – to adjust the level of the low
frequencies and click TREBLE + or – to adjust the
level of the high frequencies as you desire.
Note
You may hear some noise as you adjust the parameters.
To start adjustment with a flat equalizer curve
Click FLAT.
To reset the tone parameter of the selected sound field
to the original factory settings
Click STD.
To exit to the main menu
Click EXIT.
To return to the previous menu
Click RETURN.
To adjust the volume
Click VOL + or –.
Adjusting surround sound parameters
Change the surround parameters to fit your listening
situation. You can adjust the speaker levels and the
overall presence of the sound field.
To adjust the parameters of the PRO LOGIC sound
field, see "Getting the Most Out of Dolby Pro Logic
Surround Sound" on page 28.
1
Start playing a programme source, then click
SOUND in the main menu.
2
Click the genre of sound field you want to reset.
The previously selected mode turns on
automatically.
3
Click MODE repeatedly to select the mode you
want to adjust.
30 GB
SUR EDIT
+10 dB -10 dB
+10
-10
+ +
BASS TREBLE
– –
RETURN
4
FLAT
STD
VOL
+
–

EXIT

To exit to the main menu
Click EXIT.
To return to the previous menu
Click RETURN.
To adjust the volume
Click VOL + or –.
Note
If you make new adjustments to a sound field, the previous
settings are replaced by the new ones.
Click SUR.
The SUR EDIT menu appears.
To adjust the speaker levels
Click LEVEL then click + or – to adjust the
speakers to the levels you prefer.
SUR EDIT
REAR 0 dB
RETURN
To adjust the effect level
Click EFFECT then click UP or DOWN to adjust
the presence of the sound field to the level you
prefer.
SUR EDIT
SUR EFFECT
DOWN UP
RETURN
To reset all parameters of the current sound field to
the original factory settings
Click STD.
LEVEL
+
VOL
– +
–
EXIT
EFFECT
VOL
+
–
EXIT