Registering A Tv - Sony TA-VE800G Operating Instructions Manual

Preparing and Using the Remote

Registering a TV

Registering a Sony TV
If your Sony TV can be controlled by an infrared
remote, and it is connected to the amplifier by it's AV 1
jack, IR code registration is unnecessary.
Registering a non-Sony TV
Complete the following procedure to set the amplifier
to turn on your TV automatically whenever you turn
on the amplifier.
Registration
1
Turn on the amplifier and the TV set.
Make sure the input selector on the TV set is set to
AV 1.
2
Click FUNCTION in the main menu.
S
O
U
N
D
3
Click TV SET.
VIDEO
VIDEO
VIDEO
L D
SATL
MACRO
TV SET
14 GB
FUNCTION
ALL
OFF
VOL
+
–
SUB USER
0 ( ) p P = +
FUNCTION SELECT
1 DAT/MD
2 CD
3 TUNER
PHONO
TAPE
1 MACRO 2
EXIT
4
Click OTHER TV (or click "Sony TV" for a Sony
TV).
TV MONITOR SET
TV IR SET
GRAPHIC POSITION
RETURN
If you are using a Sony TV
The IR codes are programmed automatically and
registration is complete (click RETURN or EXIT).
Before going to step 5, cover the IR sensor on the
TV to prevent accidental operation. Otherwise,
the on-screen display may be turned off during
the programming procedure.
5
Click START.
TV MONITOR SET
TV IR SET
GRAPHIC POSITION
RETURN
6
When "PUSH YOUR COMMANDER" appears on
the TV screen, press the button on the TV's remote
that corresponds to the highlighted control
button.
Programme the button used to turn ON your TV
(e.g., CH0, CH1, CH+, etc.) as "CHANNEL 0".
TV IR SET
TV IR SET
WIDE TV DISPLAY MODE
PUSH YOUR
RETURN
Sony TV
OTHER TV
EXIT
Sony TV
OTHER TV
START
EXIT
CHANNEL 0
POWER OFF
COMMANDER
CODE CLEAR
EXIT