Setting The Clock - Sony ICF-SW1000TS Marketing Operating Instructions Manual

Fm stereo/sw/mw/lw pll synthesized receiver, stereo cassette-corder
Hide thumbs Also See for ICF-SW1000TS Marketing:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Setting the clock

Set the clock when you initially insert the
batteries or when the clock is reset at which
time "0:00" flashes.
1
TIME SET
ENTER
+
2
Tips
• The clock is displayed in
24-hour indication.
• Press TIME SET•
ENTER to stop the
flashing of "0:00".
• To set the clock
accurately, release TIME
SET • ENTER at the
time of the tone.
Press and hold TIME SET •
ENTER while pressing HOUR or
MIN repeatedly until the correct
time is displayed.
Each time MIN (¿ or ÷) is pressed,
the minute will decrease (¿) or
increase (÷) by one minute. Each
time HOUR ( – 1¿ or ÷1 + ) is pressed,
the hour will decrease ( – 1¿) or
increase (÷1 + ) by one hour.
Press and hold the button to decrease
or increase rapidly.
Release TIME SET • ENTER.
The ":" starts flashing and the clock
operates.
To display the clock
Press EXE to display the clock while operating the
radio or the cassette. The current time appears for
about 10 seconds and then the previous display
returns. However, the clock cannot be displayed
while scan tuning.
While the clock is displayed, press EXE again to
return to the previous display.
Note
You cannot set the clock while operating the radio or the
cassette.
Press RADIO POWER ON/OFF to turn off the radio, or
press p to stop the tape.
1
2
3
4
5
6
7
8
9
0
Basic Operations
1
1,2
FWD
5
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icf-sw1000t

Table of Contents