Continuous Editing - Sony DSR-2000P Operating Instructions Manual

To edit even more quickly

Continuous Editing

8
Press the AUTO EDIT button.
The edit starts.
When the edit finishes, the recorder stops at the OUT point and the
player stops about 2 seconds after the OUT point.
By skipping the preview in the foregoing procedure, you can execute the
edit even more quickly. To do so, proceed as follows.
1
Perform steps 1 through 4 of the foregoing procedure.
2
Press the AUTO EDIT button.
The edit starts.
3
Watching the editing on the monitor, at the position you wish to make
the OUT point, hold down the ENTRY/SHIFT button and press the
OUT button.
The edit ends.
The point where the edit started is set as the IN point, and the point
where the edit ended is set as the OUT point.
When you execute multiple edits in succession, you can edit from the
second time on by setting the player IN and OUT points only.
After execution of an edit, the recorder returns automatically to the OUT
point. Therefore, the recorder OUT point of the current edit becomes the
IN point of the next edit.
Section edited in previous edit
Recorder
Player
OUT point of previous edit =
IN point of next edit
Section edited in next edit
OUT point
IN point
Chapter 4 Editing
91