Sony CMT-CP505MD Operating Instructions Manual page 29

1
Press MD on the remote.
2
Perform the following procedure
depending on what you want to label:
To label a track
Press . or > on the remote repeatedly
until the desired track number appears, then
press NAME EDIT/SELECT on the remote.
To label an MD
Press NAME EDIT/SELECT on the remote
while the total number of tracks (or groups
when the Group Function is on) is
displayed.
To label a group
Press GROUP ON/OFF repeatedly until
GROUP indicator lights up, then press
GROUP SKIP repeatedly until the desired
group appears. Press NAME EDIT/
SELECT on the remote while the total
number of tracks within the desired group is
displayed.
Cursor
3
Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
Character type
Alphabet (upper cases)/
blank space/symbols
Alphabet (lower cases)/
blank space/symbols
Numbers
TOC
L-SYNC
Select
Selected AB
Selected ab
Selected 12
4
Enter a character.
Character type
Alphabet
Numbers
Blank space
´ – / , . ( ) : ! ?
& + < > _ = " ; # $ % Press 1 on the remote,
@ `
5
Repeat steps 3 and 4 to enter the rest
of the name.
6
Press ENTER/YES on the remote.
Do this
Press the corresponding
letter button (or ./
>) on the remote
repeatedly until the
character to be entered
flashes, then press
CURSORt on the
remote.
Press the corresponding
numeric buttons on the
remote.
Press 10/0 on the remote.
Press 1 on the remote
repeatedly.
then press ./> on
the remote repeatedly.
continued
GB
29