Campbell Hausfeld WL6700 Series Easy Setup Manual

Setup —
Initial
•
1
Slide handle into shroud
holes, making sure handle
is on the outside of the
bracket and the holes of
the handle line up with
the holes of the
tank bracket.
Air Tools —
Using Compressor with
• • • • •
1
Attach air hose with
1/4 inch industrial plug
to coupler. *
* Hose and Plug not included.
Setup Like a Pro
Visit us at chpower.com
• • • •
2
Slide handle into
holes, Insert screws
and Tighten.
NOTE: Coil hose and blow gun must be attached for compressor to operate properly.
• • • • •
2
Close
regulator,
Turn ON compressor
and allow tank to Fill.
• • • • •
Thread one end of coil hose
onto fitting and the other end
onto blow gun. Use 2 adjustable
Tighten
wrenches to both.
Apply thread tape to
both ends of coil hose.
• • • • •
3
Attach
air tool to
end of hose.
regulator for desired
application.
WL6700 Series - Rapid Inflation Air Compressor
Using Compressor for
1
Attach
appropriate inflation
device to blow gun.
Turn ON
2
Squeeze
• •
4
Use
Adjust desired application.
Inflation —
compressor and
trigger to inflate.
• • •
compressor for
IN630400AV 6/09
Easy Setup Guide