Table of Contents
Advertisement
Operation
Filling the water tank
In order to use the cooling/humidifier function, you need to fill the water tank.
For your convenience, the water tank can be filled from the top of the unit saving
removing the water tank.
Filling from the top
Open the water cover, and slowly pour filtered/clean water into the compartment
with a jug (as per below), and then close the water cover.
Removing & filling the water tank
Loosen the water tank fixtures on both sides of the unit, and slide the pump paddle
up, to move the pump to the top of the tank. The top part of the unit should be free
to detach from the water tank. Slowly pour water into the water tank with a jug.
Once the water tank has been filled to the
MAX fill line, replace the top part of the
unit back onto the water tank, fasten the
water tank fixtures, and slide the pump
paddle back into the water tank.
11
Advertisement
Table of Contents
