Table of Contents
Advertisement
CLEANING, CARE & MAINTENANCE
Note: Always clean the groomer attachments regularly to ensure maximum
performance and a proper operating life.
Cleaning Attachments With Water
1.
Remove attachment.
2.
Rinse the attachment under warm running water. Do NOT use hot
water as this might cause damage.
Cleaning Attachments With The Brush
•
After first removing attachment, thoroughly brush and blow out hair
clippings from cutting system, attachment and top of groomer handle.
Cleaning Foil Shaver Attachment
The foil shaver attachment has a release button at the back to remove it
from the groomer. To remove, press the button then slide off.
Oiling Blades & Cautions
•
Rinsing attachments under water (above) requires lubricating the
cutting blades 1x monthly. Using only light-grade oils (e.g. sewing
machine oil), simply spread 1-2 drops lightly over cutters with
fingertip. Wipe away all excess.
•
Use only light-grade oils as these will not evaporate nor slow down
speed of cutting blades.
•
Do not use hair oil, grease, or any oil mixed with kerosene or solvent
as these too will evaporate.
9
Advertisement
Table of Contents
