Pppoe Tab - Setting Of Pppoe Connection - Sony SNC-DF70P User Manual

Default gateway
Type the default gateway.
Obtain DNS server address automatically
Select this to obtain the address of DNS server
automatically. It can be set only when Obtain an IP
address automatically (DHCP) is selected.
Note
When you select "Obtain DNS server address
automatically", make sure that DHCP server is active on
the network.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server, if
necessary.
HTTP port number
Normally select 80. If you want to use a port number
other than 80, select the text box and type a port number
between 1024 and 65535.
Note
When you have set the HTTP port number to a number
other than 80 on the Network setting page or in the Setup
Program, access the camera by typing the IP address of
the camera on the web browser, as follows:
Example: when HTTP port number is set to 8000
OK/Cancel
See "Buttons common to every setting menu" on page
24.
PPPoE Tab - Setting of PPPoE
Connection
Use it when you connect the camera with PPPoE (Point-
to-Point Protocol over Ethernet). PPPoE connection is
the protocol that is widely used in xDSL (digital affiliate
line such as ADSL, VDSL or SDSL) as the
authentication and connection system.
PPPoE
Set whether you connect the camera using PPPoE
function or not. When On is selected, PPPoE connection
is used.
IP address
When you connect to the network by PPPoE function, IP
address obtained at PPPoE connection is displayed.
User ID
Type the user ID for the authentication necessary for
PPPoE connection. Type it up to 64 characters.
Password
Type the password for the authentication necessary for
PPPoE connection. Type it from 1 to 32 characters.
Re-type password
To certain the password, re-type the characters as them
typed in the password box.
Obtain DNS server address automatically
Select it to obtain the address of DNS server
automatically.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.
Configuring the Network — Network setting Menu
33