Sony IPELA 3-869-888-16 (1) User Manual page 126

x For the SNC-RZ30 and similar cameras
Drag the red frame with your mouse to configure a motion detection area.
By dragging each edge of the detection area, you can change its size.
Detection areas cannot be deleted.
Caution
The VMD (Camera) setting cannot be configured when the mount angle is
set to 90 or 270 degrees.
Threshold
Enter a value from 0 to 255 as the threshold for motion detection.
The motion detection processor uses this value as the standard value for
determining whether motion has occurred between two video frames.
Sensitivity
Enter a value from 0 to 8 as the sensitivity level.
Normally, you do not need to configure this setting.
x For the SNC-P1 and similar cameras
You can set up to four motion detection areas. The name of the area being
configured is displayed in blue.
Drag the red frame with your mouse to configure a motion detection area.
By dragging each edge of the detection area, you can change its size.
126
Chapter 5 Settings