Sony IPELA 3-869-888-16 (1) User Manual page 116

1
Display the "VMF" screen, and click [Add] at the top right of the screen.
The "Add VMF Package" screen appears.
2
Select a "Moving" package or an "Unattended" package, and then click
[OK].
The package is added to the list, and the VMF configuration screen appears.
Note
The package name is created automatically at this point.
3
Configure each item.
A VMF package consists of a combination of up to 3 filters (motion
detection criteria), with advanced settings for each filter, and up to 6
inactive areas.
Follow the steps below to configure filters and inactive areas.
(1) Set the filter name and filter type (1).
(2) Click
the criteria in area 3.
Make sure to click
filter or inactive area before configuring criteria.
Clicking
the filter criteria.
(2) under area 1, and configure
under the desired
(Off) switches the button to
(On), which enables you to configure
Chapter 5 Settings
116