Cannot Connect To A Wireless Lan Network - Denon DRA-800H Owner's Manual

Contents Connections

Cannot connect to a wireless LAN network

Cannot connect to the network.
The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting
0
details of this unit. (v p. 133)
Shorten the distance from the wireless LAN access point and remove any obstructions to improve access first before re-connecting again. Place the
0
unit away from microwave ovens and other network access points.
Configure the access point channel settings away from channels that are being used by other networks.
0
This unit is not compatible with WEP (TSN).
0
Cannot connect to a WPS Router.
Check that the WPS mode of the router is operating.
0
Press the WPS button on the router and then press the "Connect" button displayed on the TV within 2 minutes.
0
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to "None", "WPA-PSK (AES)" or WPA2-PSK (AES).
0
(v p. 133)
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router. In this case, use the "Scan
0
Networks" or "Manual" method to connect.
Cannot connect to the network using iPhone/iPod touch/iPad.
Update the iPhone/iPod touch/iPad firmware to the latest version.
0
When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
0
Front panel Display
Playback Settings
169
Rear panel
Tips
Remote Index
Appendix