Source Rename; Hide Sources; Source Level - Denon DRA-800H Owner's Manual

Contents Connections

Source Rename

Changes the display name of the input source.
0
Once changed, the name is displayed on the display and menu screens
of this unit.
If the device name can be acquired from a connected HDMI device, the
0
display name is changed automatically.
Use this function to change names as needed when the device you are
using differs from the input source on this unit. (This feature will be
supported via firmware update.)
CBL/SAT / DVD /
Blu-ray / Game /
Change the display name for input source.
Media Player / CD /
TV Audio / Phono:
The "Source Rename" settings are returned
Set Defaults:
to the default settings.
0 Up to 16 characters can be input.
Front panel Display
Playback Settings

Hide Sources

Remove from the display input sources that are not used.
Show
(Default) :
Hide:

Source Level

This function corrects the playback level of the selected input source's
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
-12 dB – +12 dB (Default : 0 dB)
0 "Source Level" settings are stored for each input source.
127
Rear panel
Tips
Use this source.
Do not use this source.
Remote Index
Appendix