Sony ICF-SC1 Operating Instructions (primary manual) Operating Instructions Manual page 27

*All tuning key operation becomes ineffective when receiving the
priority channel with Priority Scanning (except for that using +
or -). To switch to other scanning or tuning modes, exit Priority
Scanning first by pressing PRI/DELAY.
*Though the frequency step setting is memorized for the priority
channel, it has no effect on Priority Scanning.
*If you try to run Priority Scanning with no priority frequency
(i.e., there is no frequency preset for the priority channel, preset
channel 30 on page 10), the following will be displayed
momentarily, and then the receiver will return to previous status.
PAGE
designated as a SKIP frequency, the following will be displayed
momentarily, and then the receiver will return to previous status.
than channel 30 on page 10.
PRESET 3 /-l
- - - - - -
2 7