The Product; The Buttons - Fluke 709 User Manual

709/709H/710
Users Manual

The Product

The subsequent sections are about the features and functions of
the Product.

The Buttons

Figure 2 and Table 4 show the location and brief descriptions of
the Product buttons.
Figure 2. Button Locations
6
Table 4. Button Descriptions
Button Function

Push to enable step, ramp, or start valve tests.

Push to turn on or turn off the backlight.

Push to turn on and turn off the Product.
Push to set the output to 20 mA when in mA

Source or mA Simulate modes. In Measurement
mode the button does not set the output current.
Push to step the output up or down by 25 %
increments (4, 8, 12, 16, 20 mA).

When valve test is enabled, push to step the
output as 3.8, 4, 4.2, 8, 12, 16, 19.8, 20, and
20.2 mA.
Push to set the output to 4 mA when in mA
Source or mA Simulate mode.

In Measurement mode the button does not set the
output current.
Push to enter the Main menu. Push a second time

to exit the Main menu. See Main Menu.