Vax Cordless Slim Vac Series Manual page 8

Getting started
Fixing the wall bracket
Fully assemble the
vacuum but do not
attach the battery.
Use both screws and wall
plugs to secure the wall
bracket to the wall. Place
covers over the screws.
Attach the wall bracket
to the handle.
Firmly press the vacuum
handle into the wall
bracket to secure.
With the wall bracket
attached, stand the
vacuum close to the wall,
in the upright position
with the Powered Head
flat on the floor.
The tools and the accessory
bag can also be stored on
the wall bracket.
Holding the wall bracket
firmly in place, carefully
remove the vacuum. Using
a pencil make a small
mark for each screw.