Selecting The Picture Viewing Mode - Sony VPL-HS10 Marketing Specifications & Features Operating Instructions Manual

Selecting the
Picture Viewing
Mode
You can select the picture viewing mode that best
suits the type of program or room condition.
LIGHT INPUT
DYNAMIC STANDARD CINEMA
PICTURE MODE
USER 1 USER 2 USER 3
ENTER
APA MS SLIDE MENU
WIDE MODE LENS RESET
VOLUME SIDE SHOT
+ +
– –
24

Selecting the Picture Viewing Mode

GB
PICTURE MODE buttons
DYNAMIC
STANDARD
CINEMA
USER 1, 2 and 3
Press one of the PICTURE
MODE buttons (DYNAMIC,
STANDARD, CINEMA and
USER 1, 2 and 3).
DYNAMIC
Select for enhanced picture contrast and
sharpness.
STANDARD
Recommended for normal viewing condition in
your home.
Also select to reduce roughness when viewing
the picture with DYNAMIC.
CINEMA
Select for soft, film-like picture.
USER 1, 2 and 3
You can adjust the quality of the picture to suit
your taste and store the settings into the selected
memory of the projector. Press one of the USER
1, 2 and 3 buttons, then adjust the picture by
using the menus. The settings are stored, and
you can view the picture with the adjusted
picture quality by pressing the button. (1 page
27)