Selecting The Wide Screen Mode - Sony VPL-HS10 Marketing Specifications & Features Operating Instructions Manual

6
Press FOCUS +/– to adjust the
focus.
Adjust to obtain sharp focus.
To turn off the power
1 Press the [/1 (on/standby) switch.
A message "POWER OFF?" appears on the
screen.
2 Press the [/1 switch again.
The ON/STANDBY indicator flashes in green and
the fan continues to run to reduce the internal heat.
Also, the ON/STANDBY indicator flashes quickly
during which you will not be able to light up the
ON/STANDBY indicator with the [/1 switch.
3 Unplug the AC power cord from the wall
outlet after the fan stops running and the
ON/STANDBY indicator lights in red.
You can turn off the projector by holding the [/1 (on/
standby) switch for about one second, instead of
performing the above steps.
22

Selecting the Wide Screen Mode

GB
FOCUS +/– button
Selecting the Wide
Screen Mode
You can enjoy various wide screen mode according to
the video signal received. You can also select it using
the menu. (1 page 28)
LIGHT INPUT
DYNAMIC STANDARD CINEMA
PICTURE MODE
USER 1 USER 2 USER 3
ENTER
APA MS SLIDE MENU
WIDE MODE LENS RESET
VOLUME SIDE SHOT
+ +
– –
Press WIDE MODE.
Each time you press the button, you can select
the "Wide Mode" setting.
WIDE MODE button