Specifications - Sony VPL-HS1 Operating Instructions Manual

Specifications

System
Projection system
LCD panel
Lens
Lamp
Projection picture size
Color system
Acceptable video signals
Acceptable computer signals
Speaker
Input/Output
Video input
AUDIO
40
Specifications
GB
3 LCD panels, 1 lens, projection
system
0.7-inch TFT LCD panel,
1,440,000 pixels (480,000
pixels × 3)
1.2 times zoom lens (manual)
120 W UHP type
Range: 40 to 150 inches (measured
diagonally)
NTSC /PAL/SECAM/NTSC
3.58
PAL-M/PAL-N system,
switched automatically/
manually
15k, DTV (480i/480p/1080i/720p)
fH: 19 to 72 kHz
fV: 48 to 92 Hz
Stereo speakers system, 33 mm
5
(1 / inches) diameter,
16
max. 2 W 2
VIDEO: phono type
Composite video: 1 Vp-p
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type (male)
Y (luminance): 1 Vp-p
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
±
Vp-p 2 dB (NTSC)
(75 ohms terminated),
±
burst 0.3 Vp-p 2 dB (PAL)
(75 ohms terminated)
Phono type 2, stereo
PJ MULTI
"Memory Stick" slot 1
/
4.43
General
Dimensions
Mass
Power requirements
Power consumption
Operating temperature
Operating humidity
±
2 dB
Storage temperature
Storage humidity 10% to 90%
Supplied accessories
±
2 dB
500 mVrms, impedance more
than 47 kilohms
32-pin multi connector
Analog RGB/component:
R/C (P ): 0.7 Vp-p ±2 dB
R R
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/C (P ): 0.7 Vp-p ±2 dB
B B
(75 ohms terminated)
SYNC/HD: Composite sync
input: 1-5 Vp-p high impedance,
positive/ negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD: Vertical sync input: 1-5
Vp-p high impedance, positive/
negative
340 154 300 mm
1 1 7
(13 / 6 / 11 /
2 8 8
(w/h/d)
Approx. 3.9 kg (8 lb 10 oz)
AC 100 to 240 V, 1.9-0.8 A,
50/60 Hz
Max. 190 W
(Standby mode: 5 W)
0ºC to 35ºC (32ºF to 95ºF)
35% to 85% (no condensation)
ºC to 60ºC ( ºF to 140ºF)
–20 –4
Remote control RM-PJHS1 (1)
Size AA (R6) batteries (2)
Signal interface cable SIC-HS10
(5 m) (1)
AC power cord (1)
Air filter (for replacement) (1)
Lens cap (1)
Operating Instructions (1)
inches)