Sony VPL-HS1 Operating Instructions Manual page 20

Menu Item
INPUT VIDEO
SETTING MEMORY
(continued)
SET STATUS
SETTING
INPUT-A
LANGUAGE
POWER SAVING When set to ON, the POWER SAVING indicator lights. The projector goes into power
INSTALL KEYSTONE
SETTING MEM (memory)
DIGIT
KEYSTONE
KEYSTONE DIR
MENU POSITION Selects the display position from TOP LEFT, BOTTOM LEFT, CENTER, TOP
MENU COLOR
MENU
BACKGROUND
LAMP TIMER
20
Menu Configurations
GB
Description
You can select picture viewing mode that best suits the type of picture or the
environment.
OFF: Select for the setting stored in each input channel or input signal.
DYNAMIC: Select for enhanced picture contrast and sharpness.
STANDARD: Recommended for normal viewing condition. Also select to reduce
roughness when viewing the picture with DYNAMIC.
LIVING: Select for soft, film-like picture.
USER 1, 2 and 3: You can adjust the quality of the picture to suit your taste and store
the settings. Once the settings are stored, you can view the picture with the adjusted
picture quality by pressing the button.
To store the settings
1 Select USER 1, USER 2 or USER 3.
2 Adjust the items you want in the menus.
Items that can be stored are:
CONTRAST, BRIGHT, COLOR, HUE, SHARP, RGB ENHANCER,
D.PICTURE, COLOR TEMP, COLOR SYS, SCAN CONV, ASPECT.
Tip
You can also adjust the picture quality in DYNAMIC, STANDARD or LIVING
mode. To reset to the factory setting, press RESET.
Set to OFF to turn off the on-screen displays except for the menus, message when
turning off the power, and warning messages.
To display all of the on-screen display again, set to ON.
Selects the signal input from the PJ MULTI connector.
COMPUTER: Inputs the signal from a computer.
COMPONENT: Inputs the component or progressive component signal from a DVD
player, digital BS tuner, etc.
VIDEO GBR: Inputs the signal from a TV game, DVD player or HDTV broadcast.
Selects the language used in the menu and on-screen displays. Available languages
are: English, French, German, Italian, Spanish, Japanese, Chinese, Portuguese and
Korean.
saving mode if no signal is input for 10 minutes, and the lamp goes out and the cooling
fan keeps running. In power saving mode, no button functions for the first 60 seconds.
It is cancelled when a signal is input or any button is pressed. If you do not set the
projector to power saving mode, select OFF.
ON: DIGIT KEYSTONE setting is stored.
The data is retrieved when the projector power is turned on. The setting will remain
the same every time.
OFF: DIGIT KEYSTONE is reset to "0" when the power is turned on next time.
Corrects the trapezoidal distortion caused by the projection angle. Use this item after
selecting the type of distortion, H (horizontal) or V (vertical), with KEYSTONE DIR.
When the picture is a vertical trapezoid (
distortion with DIGIT KEYSTONE. When the picture is a holizontal trapezoid
), select H, then correct the distortion with DIGIT KEYSTONE.
(
RIGHT and BOTTOM RIGHT.
Selects the tone of the menu display from STANDARD, WARM, COOL, GREEN or
GRAY.
Selects the intensity of the background picture of the menu display from DARK,
STANDARD or LIGHT.
Indicates how long the lamp has been turned on.
), select V. Next, correct the