The Install Setting Menu - Sony VPL-EX4 Operating Instructions Manual

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
V Key s t o n e :
I m ag e F l i p :
B a ck g ro u n d :
L a m p M o d e :
High Altitude Mode: O f f
S e c u r i t y L o ck :
Setting items
V Keystone
Image Flip
Background
Lamp Mode
High Altitude
Mode
Security Lock
Note
If you set "High Altitude Mode" to "On" at an altitude of under 1,500 m, the reliability of the
lamp may be reduced.
32
The INSTALL SETTING Menu
Input-A
0
O f f
B l u e
S t a n d a rd
O f f
Functions
Corrects the trapezoidal distortion caused by the projection
angle using the v/V/b/B keys on the Remote Commander.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Flips the image on the screen horizontally and/or vertically.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
• Off: The image does not flip.
Selects the background color of the screen when no signal
is input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
This setting becomes effective when the background color
is selected.
Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
Set to "On" when the projector is used at an altitude of
1,500 m or higher.
Turns on the projector's security lock function.
When set to "On," turns on the security lock function,
which locks the projector once a password has been set.
For details, see "Security Lock" on page 20.
Initial setting
0
Off
Blue
Standard
Off
Off