The Install Setting Menu - Sony VPL-ES3 Operating Instructions Manual

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
V Key s t o n e : 0
I m ag e F l i p : O f f
B a ck g ro u n d : B l u e
L a m p M o d e : S t a n d a rd
High Altitude Mode: O f f
S e c u r i t y L o ck : O f f
Setting items Functions
V Keystone Corrects the trapezoidal distortion caused by the projection
angle using the v/V/b/B keys on the Remote Commander.
When the bottom of the trapezoid is longer than the top
When the top of the trapezoid is longer than the bottom
Image Flip Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Background Selects the background color of the screen when no signal
is input to the projector. Select "Black" or "Blue."
Normally, set to "Blue."
This setting becomes effective when the menu is cleared
after setting of the background color.
Lamp Mode Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
High Altitude Set to "On" when the projector is used at an altitude of
Mode 1,500 m or higher.
Security Lock Turns on the projector's security lock function.
When set to "On," turns on the security lock function,
which locks the projector once a password has been set.
For details, see "Security Lock" on page 20.
Input-A
: Sets a lower value.
: Sets a higher value.
Initial setting
0
Off
Blue
Standard
Off
Off
The INSTALL SETTING Menu
31