Warning Messages; Caution Messages - Sony Cineza VPL-HS2 Operating Instructions Manual

Indicators
The LAMP/COVER or TEMP/FAN indicator on the
control panel lights up or flashes if there is any trouble
with your projector.
LAMP/COVER Indicator
LAMP/
COVER
LAMP/COVER
flashes.
LAMP/COVER
lights up.
TEMP/FAN
flashes.
TEMP/FAN
lights up.
LAMP/COVER
and TEMP/FAN
light up.
30
Troubleshooting
GB
TEMP/FAN Indicator
TEMP/ POWER ON/
FAN SAVING STANDBY
c Attach the lamp cover or the air filter
cover securely. (1 pages 31 and 32)
c The lamp has reached the end of its
life. Replace the lamp. (1 page 31)
c The lamp becomes a high temperature.
Wait for one minute to cool down the
lamp and turn on the power again. (1
page 20)
c The fan is broken. Consult with
qualified Sony personnel.
c The internal temperature is unusually
high. Check to see if nothing is
blocking the ventilation holes.
c The electrical system breaks down.
Consult with qualified Sony
personnel.

Warning Messages

Use the list below to check the meaning of the
messages displayed on the screen.
High temp.! c Turn off the power.
c Check to see if nothing is blocking the
Lamp off in 1
min. ventilation holes.
c Input a signal that is within the
Frequency is
out of range! acceptable range of the frequency.
c Set the output signal on an external
monitor of the connected computer to
SVGA.
c Set "Input-A Signal Sel." in the SET
Please check
Input-A Signal SETTING
Sel. when RGB signal is input from the
computer. (1 page 27)
c It is time to replace the lamp. Replace
Please replace
the LAMP. the lamp. (1 page 31)
c It is time to replace the air filter. Replace
Please replace
the filter. the air filter. (1 page 32)

Caution Messages

Use the list below to check the meaning of the
messages displayed on the screen.
c No signal is input. Check connections.
NO INPUT
(1 page 10)
Not applicable! c Press the appropriate button.
menu to "Computer"