Dvi (Digital Visual Interface) Input Connection; Special Remote Buttons - Panasonic PT-4743 Operating Instructions Manual

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

1
The DVI/HDCP input on your PTV can accommodate
copy protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i or 720p picture signals. The
DVI/HDCP input will also accept and display 480i and 480p
picture signals.
Notes:
1. DVI/HDCP = Digital Visual Interface / High-Bandwith
Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the PTV to a set top
box or a DVD player.
Procedure
• Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
• Connect the DVI output from the set top box or a DVD
player to the DIGITAL IN input on the back of the PTV.
• Connect the Audio Out signal from the set top box or
DVD player to the L and R Audio inputs associated with
the DIGITAL IN input.

Special Remote Buttons

ASPECT Button
Customer Options depending on Component Input Signal
INPUT
2
standard and is
SIGNAL
1080i
480p (16:9)
3
.
480p (4:3)
480i
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences..
Note:
BBE Button
Press this button to turn BBE VIVA 3D (available on PT-53TW53
and PT-56TW53 only) or BBE sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio modes. If
you are receiving a stereo program and you press this button, you
can cycle between STEREO and MONO.
O E
PTIONAL QUIPMENT
DISPLAY ON SCREEN
16:9 only
Default to 16:9
Default to FULL mode.
Note: Will stretch picture
horizontally..
Default to JUST mode
This will display a 4:3 picture
at its standard 4:3 size with
gray
recommended
4:3 pictures as it may create
a permanent
screen if displayed for a
prolonged period of time.)
This will expand the 4:3
picture uniformly (width and
height) to full screen width
and then reposition the
picture vertically.
(Recommended for letterbox
pictures.)
If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu.
This will show picture at full
screen size. (Recommended
for anamorphic pictures.)
This will stretch the right and
left edges of a 4:3 picture to
fill the screen, The center of
the screen will have aspect
correction appliled. The size
of the picture will depend on
the original signal.
(Recommended for regular
TV viewing.)
C
ONNECTIONS
ASPECT BUTTON
OPTIONS
No options
4:3, Full or Zoom (see
below)
4:3, Full or Zoom (see
below)
4:3, Full, Just or
Zoom (see below)
side bars. (Not
for viewing
image on
7 l