Automatically Tuning The Tv Using The Remote Control - Sony KP-41PX1 Instruction Manual

Getting Started - First Time Operation

Automatically Tuning the TV using the Remote Control

You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV
automatically searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the projection TV screen asking you to
automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select
the menu Auto Programme in the
section "Automatically Tuning the TV" of this instruction manual.
VIDEO TV
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 892
S
10
Getting Started - First Time Operation
(PRESET) menu and proceed in the same way as described below or, please refer to the
1
Press the OK button on the remote control to select YES. A new menu
appears automatically on the screen asking you to check that the
antenna is connected.
2
Confirm that the antenna is connected and then press the OK button.
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and
do not press any button, otherwise the automatic tuning will
not be completed.
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
Notes: • To stop the automatic tuning, press the MENU button.
• If you stop the automatic tuning by pressing the MENU
button, the Programme Sorting menu does not appear
automatically on the screen.
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
Please confirm that
antenna is connected
Confirm: OK
AUTO PROGRAMME
PROG SYS CH LABEL
1 B/G C 26 - - - - -
AUTO PROGRAMME
PROGRAMME SORTING
PROG SYS CHAN LABEL
0 B/G C 28 BBC-W
1 B/G C 40 MV-CH
2 B/G C 41 TVE-1
3 B/G C 31 TVE-2
4 B/G C 34 ANT-3
5 B/G C 27 TELE 5
6 B/G C 47 C PLUS
7 B/G C 44 - - - - -
8 B/G C 23 - - - - -
9 B/G C 35 CNN -
Select PROG: + OK
Exit: MENU