Connecting A Satellite Receiver (Sat) And A Vcr - Sony KP 43T90 Operating Instructions Manual

Connecting a satellite receiver
(SAT) and a VCR
1
Connect the cable from the satellite
antenna to the satellite receiver.
2
Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
3
Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.
4
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.
5
Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
*
If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
Note:
• To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
control.
Disconnect all power sources before making any connections.
(Rear of projection TV)
IN
VIDEO 1 VIDEO 3 VIDEO 4
OUT
S VIDEO AUDIO
(VAR/FIX)
VIDEO
Y
L
P
B
(MONO)
AUDIO
P
R
R
COMPONENT
VIDEO
S VIDEO
AUDIO-L
AUDIO-R
5
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
3
AUX
TO
SATELLITE IN
CONVERTER
AUDIO R AUDIO L VIDEO
LINE
OUT
VHF/UHF
1
Satellite
L
(MONO)
antenna
AUDIO
R cable
VMC-810S/
820S (not
supplied)
AUDIO R AUDIO L VIDEO
LINE
IN
LINE
VCR
OUT
Coaxial cable
SAT
VHF/UHF
S VIDEO
OUT
IN
YC-15V/
4
30V (not
supplied)
S VIDEO
VHF/UHF
OUT
IN
2
Cable/
Antenna
13