Setting Up The Lcd Projection Tv Channel List; Using Initial Setup - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Setting Up the LCD Projection TV

Setting Up the LCD Projection TV Channel List

Using Initial Setup

z
If you are using a
CableCARD, Auto
Program is disabled for
the CABLE input.
54
After you finish connecting the TV, you need to run the Initial Setup feature,
which automatically creates a list of available analog and digital channels.
The Initial Setup screen appears when you turn on your TV for the first time
after hooking it up. If you do not want to set up the channels at this time, you
can do it later by selecting the Auto Program option in the Channel menu
(see page 102).
✍
The Initial Setup feature does not apply for installations that use a
cable box for all channel selection.
To run Initial Setup the first time you turn on your TV
1
Press to turn on the TV.
POWER
The Initial Setup screen appears.
2
Press V or v to select the on-screen display language. Then press
The message "Start auto program now?" appears.
3
V v
Press or to select "Yes", then press
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 102.
To add individual digital channels
❑
Use the Digital Channel feature as described on page 102.
✍
Auto Program may take up to 50 minutes to complete. A progress
bar is displayed while the channel list is being created.
.
.