Connecting The Md Walkman To Your Computer - Sony MZ-DN430 Operating Instructions Manual

Connecting the MD Walkman to your computer

After the software installation is completed, connect the MD Walkman to your computer.
1
Insert a recordable disc into the MD Walkman.
2
Insert a new dry battery into the MD Walkman, and connect the MD Walkman
to the computer using the supplied dedicated USB cable.
Insert a new
dry battery
3
Check the connections.
When the connections have been properly made, "PCppMD"* appears in the display
of the MD Walkman.
∗
Depending on the MD Walkman, "Net MD" may be displayed.
Note
When using the MD Walkman connected to your computer, it is recommended that you use a new dry
battery. We do not assure the results should there be a mis-operation, transferring failure, or destruction
of audio data caused by insufficient battery power.
36
MD Walkman
To the USB jack/
dedicated jack
Dedicated USB cable
To the USB
connecting terminal
Computer