Remote Setup - InFocus INL3149WU User Manual

SETUM AND INSTALLATIPN

Remote setup

Installing / replacing the batteries
Two AAA size batteries are required. (Not included)
1. Push the clip to release the battery cover.
2. Install new batteries (AAA/R03). Ensure that you have the batteries' polarity (+/–) aligned correctly.
3. Close the battery cover and press it down until it clicks into place.
Note:
Do not mix different types of batteries or new and old batteries.
CAUTION
To ensure safe operation, please observe the following precautions:
‡ Use AAA/R03 type batteries.
‡ Avoid contact with water or liquid.
‡ Do not expose the remote control to moisture or heat.
‡ Do not drop the remote control.
‡ If the batteries have leaked in the remote control, carefully wipe the case clean and install new
batteries.
‡ There is a risk of explosion if the batteries are replaced with the wrong type.
‡ Dispose of used batteries according to the instructions.
‡ Remove the batteries from the remote control when not using for extended periods.
‡ The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or
fluorescent lighting.
18 English