Display 3D Menu - InFocus INL3149WU User Manual

USING THE MRPJECTPR
Brightness Iode
Adjust the brightness mode settings.
‡ DynamicBlack: Automatically adjusts the brightness based on the source signal for optimum contrast
performance.
‡ Mower: Select the power percentage to adjust the overall brightness.
Reset
Return the factory default settings for color settings.

Display 3D menu

Note:
‡
This projector is a 3D ready projector with DLP-Link 3D solution.
‡ Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video.
‡ Supports Frame Sequential (page flip), Side-by-Side (SDS) and Top Bottom 3D video formats.
‡
To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not
supported.
‡ To reach the best performance, resolution 1920x1080 is recommended, please be noted that 4K
(3840x2160) resolution is not supported in 3D mode.
‡
3D from a Blu-Ray 3D is detected and displayed automatically.
3D Iode
Use this option to disable the 3D function or select the appropriate the 3D function.
Off: Select "Off" to turn off 3D mode.
‡
‡ DLM-Link: Select to use optimized settings for DLP 3D Glasses.
Note:
If 2D and 3D sources are both connected, turn off 3D when selecting the 2D source.
3D → 2D
Use this option to specify how the 3D content should appear on the screen.
3D: Display 3D signal.
‡
L (Left): Display the left frame of 3D content.
‡
R (Right): Display the right frame of 3D content.
‡
3D Format
Use this option to select the appropriate 3D format content.
‡ Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡ SBS: Display 3D signal in "Side-by-Side" format.
‡ Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡ Frame Sequential: Display 3D signal in "Frame Sequential" format.
3D Sync Invert
Select whether the right or left eye of the glasses synchronizes first.
32 English