Installation
Figure 5
Installation of the titration stand
1
Place a magnetic stirring rod in a titration cell. Place a
titration cell over the magnetic stirrer.
2
Position a rubber ring on the stand rod to set the
minimum height of the electrode holder. Press the
electrode holder lock button and place the electrode
holder on the stand rod.
3.4.2.1
Electrical connection of the magnetic stirrer
16
1. Connect the cable of the magnetic stirrer to the
TitraLab.
The power is supplied via the TitraLab.
3
Insert the electrode and adjust the height of the
electrode holder.
STIRRER
port on the back of the