Installing Battery - Dell Latitude 5480 Owner's Manual

NOTE: The number of screws will vary depending on the type of battery installed.
c Lift the battery from the computer [3].
NOTE: Discharge the battery as much as possible before removing from the system. This can be done by
disconnecting the A/C adapter from the system (while the system is turned on) to allow the system to drain the
battery.
d Unroute the cable from the routing channel [1] and remove the cable from the battery.
GUID-33E02BE1-560A-4CDF-AC33-37EEC8C32AA7

Installing battery

1 Insert the battery into the slot on the computer.
2 Route the battery cable through the routing channels.
3 Tighten the M2*6 captive screw to secure the battery to the computer.
4 Connect the battery cable to the connector on the system board.
5 Install the base cover.
6 Follow the procedure in
20 Removing and installing components
After working inside your computer.