Installing System Board - Dell Latitude 5480 Owner's Manual

GUID-10E67F1C-0F16-4E35-9F78-359F844A7C42

Installing system board

1 Align the system board with the screw holders on the computer.
2 Tighten the M2*2 screws to secure the system board to the computer.
3 Place the metal bracket to secure the DisplayPort over USB Type-C.
4 Tighten the M2*2 screws to secure the metal bracket on the DisplayPort over USB Type-C.
5 Connect the power connector port cable to the connector on the system board.
6 Connect the display cables to the connectors on the system board.
7 Place the metal bracket to secure the display cable.
8 Tighten the M2*2 screw to secure the metal bracket.
9 Connect the following cables:
a touchpad
b USH board
c LED board
10 Install the:
a chassis frame
b system fan
c heat sink
d coin cell battery
e memory module
f SSD card
g WLAN card
40 Removing and installing components