Using Border Print - Sony UP-CR10L Operating Instructions Manual

Using Border Print

When printing images stored on the memory card, you can
select from a variety of border designs to be printed around
the image, and you can also enter text to be printed.
This function is available in Full mode and Event mode.
To use this function, the expansion CompactFlash card
must be inserted.
You can load new border designs and enter text characters
from the administration screen. For details, see the section
"Template Tab" on page 23.
1
Touch any place on the screen.
The language selection screen appears.
Memo
When using Event mode, and when only one language
was selected at the administration screen, the language
selection screen does not appear. Instead, the Main
Menu appears. In this case, proceed to step 3.
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Border Print].
The border selection screen appears.
39
Using Border Print