Sony DPP-FP85 Operating Instructions Manual page 70

Symptom
The picture quality
and colors of the
image previewed
on the screen
differs from those
printed.
The printed image
differs when an
image is printed
directly from the
memory card or an
external device
connected to the
printer and when it
is printed via a PC.
The date cannot be
printed.
The date is printed
unintentionally.
The image cannot
be printed fully in
the print range.
Borders remains.
70 GB
Check
—
—
• Is "Date Print" set to "Date"
or "Date/Time"?
• Does the image support
DCF?
• Is "Date Print" set to "Off"?
• Was the date saved with the
image when it was shot with
the digital camera?
• Did you select "Pattern 1" or
"Pattern 2" for "Borders" in
the Print setup menu?
• Is the aspect ratio of the
image correct?
Cause/Solutions
c Because of differences in the display
method or profiles of a LCD screen,
please regard the image being displayed
on the display as just a reference. To
adjust picture quality, do either of the
following:
– MENU button - Print setup - Color
Setting (.page 40)
– MENU button -Edit-Adjust
c Because of the differences in the printer's
internal processing and PC software
processing, the printed images will be
different.
c Press MENU button, and set "Date Print"
in the Print setup menu to "Date" or
"Date/Time." (.page 39)
c The "Date Print" function of this unit
supports an image that is compatible with
the DCF standards.
c Press MENU button, and set "Date Print"
in the Print setup menu to "Off."
(.page 39)
c When the date was saved with the image,
you cannot make a print without a date.
c Press MENU button, and set "Borderless"
by selecting Print setup - Borders.
(.page 39)
c Depending on the type of digital camera
used, the aspect ratio of the recorded
image differs, so the image may not be
printed covering the entire printable area.