Table of Contents
Advertisement
VGN-FS600 Series models
1
Turn on your computer.
2
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.
3
Use the < or , key to select Security to display another screen, select Set Machine Password, and then press the Enter
key.
4
On the password entry screen, enter the password twice and press the Enter key.
The password should be up to 7 alphanumeric characters long.
The following is to configure your computer to prompt password entry when you turn on your computer or display the BIOS setup screen.
5
Select Password When Power ON under Security.
Press the space bar to change the setting from Disabled to Enabled.
6
Use the < or , key to select Exit and then Exit (Save Changes); and press the Enter key.
On the Setup Confirmation screen, confirm that Yes is selected and then press the Enter key.
n N
Customizing Your VAIO Computer
128
Advertisement
Table of Contents
