Connecting To Standard Cable Access (Catv) - Sony VGN-FS600 Series User Manual

Connecting to standard cable access (CATV)

To connect in CATV mode (Option 1)
1 Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2).
2 Connect the other end of the coaxial cable to the VHF/UHF port (3) on the A/V port replicator.
To connect in CATV mode (Option 2)
1 Connect the two metal hooks on the 75-ohm/300-ohm RCA transformer cable (1) (optional) to your cable service access (wall
outlet) (2).
2 Connect the TV coaxial cable (3) (supplied) from the transformer end of the RCA transformer cable to the VHF/UHF port (4)
on the port replicator.
n N
80
Using Peripheral Devices