Connecting With A Cable Or Satellite Set-Top Box (Stb) - Sony VGN-FS600 Series User Manual

Connecting with a cable or satellite set-top box (STB)

You can connect your computer to cable service access that uses a set-top box (cable or satellite). When using the set-top box
(STB) setup, you can only change channels through the STB, using its controls or supplied remote commander.
When using the STB setup:
A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the TV to
the channel-out number (channel 3, 4, etc.) or direct video input specified by your cable or satellite service provider.
You may be able to use a universal remote control or commander to change TV channels, if the device is able to control the
STB.
n N
84
Using Peripheral Devices