Samsung AC026RN1DKG Service Manual page 83

Disassembly and Reassembly
No Parts
3-46
Procedure
5) Cut the cable-tie.
6) Disconnect the wire between assy
control out and motor.
7) Disassemble the 2 Holder Motor.
- Unscrew 2 screws
8) After disassembling the Motor and
Blower for the set, disassemble the
Blower by use of 3mm wrench.
9) Disassemble the both of Case Blower Out.
- Unscrew 6 screws
Remark
Samsung Electronics