Advertisement
1. Unplug power cord from wall outlet. Empty out remaining water and
allow Kettle to cool before cleaning.
2. If necessary, remove and clean the Aquascreen
under running water.
3. Under normal use, a deposit of scale may form on the inside
of the Kettle and cause some discolouration. Scale, which has
accumulated inside the Kettle, can be removed by boiling equal
parts of white vinegar and water (2 cups / 500 ml of each is
recommended). Once the water has boiled, allow mixture to stand
several hours or overnight. Empty out mixture and fi ll Kettle to the
MAX level with fresh water. Bring water to a boil and discard. For
heavy scale build-up, repeat this process.
NOTE: This build-up can be delayed by pouring out old water and
refi lling before each use.
4. DO NOT USE ABRASIVE CLEANERS.
5. DO NOT ALLOW WATER TO ENTER THE POWER BASE.
6. DO NOT IMMERSE KETTLE OR POWER BASE IN WATER OR
OTHER LIQUID.
7. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
JK1250_Booklet.indd 5
JK1250_Booklet.indd 5
®
Filter by rinsing
5
6/11/15 11:47 PM
6/11/15 11:47 PM
Advertisement
