Performing A Hard Reset - Sony PEG-SJ33 CLIE Handbook (primary manual) Operating Instructions Manual

Performing a hard reset

If a soft reset does not solve your problem, you need to perform a hard reset to
restart your CLIÉ handheld.
Notes
• By performing a hard reset, all records and add-on applications stored
on your CLIÉ handheld will be erased.
• Perform a hard reset only if a soft reset does not solve your problem.
However, you can restore data on your CLIÉ handheld if you have backed up data to
your computer or "Memory Stick" media.
b
For details, refer to "Backing up your Sony CLIÉ™ handheld data" in "Handbook."
1
Slide down the POWER/HOLD switch.
2
Slide and hold the POWER/HOLD switch down, then use
the stylus pin to gently press and release the RESET
button.
3
When the "palm powered" screen is displayed, release
the POWER/HOLD switch after three seconds.
The message warning that you are about to erase all the data stored on your
CLIÉ handheld is displayed.
4
Press the scroll v button on your CLIÉ handheld.
Press the scroll v button
Continued on next page
31